﻿
2016-10-05 Middle mouse button can rotate the view on drag

2016-09-30 Form load correction

2016-09-29 Helical rack tooth cut CAD fixes

2016-09-21 Agent 75 replaced with "Disabled Number"

2016-09-20 Elliptical gears added

2016-09-08 JIS Splines now can be in inches

2016-09-06 Tab update after hub form closes, bevels only
			spur space width added to data sheet
			spur Tooth Thickness Minimum added to data sheet
			Fine Pitch 20 deg Fillet Coefficient correction
			Limit add mod coef abs(value) < 2 for CPI
			
2016-08-25 ASMESilentChainToothEntities now works in metric mode

2016-08-03 Profile Modification APL was not being calculated

2016-07-11 Correct to DIN 5480, 2 Module, 13 teeth, Addendum Modification

2016-07-07 Routed around legacy full involute sub for internal gears
			correction when in free form mode, changing the tooth thickness via MOW when the gear is helical

2016-07-01 Adjustment to EXT Splines when the Minimum Minor diameter is optioned.

2016-03-16 e.Handled added to silence the keyboard beeps. _LostFocus(sender, e) : e.Handled = True

2015-12-20 Legacy Full Involute revisions

2015-12-05 Harmonic distribution of bevel tooth cuts added

2015-11-04 Full Fillet tooth profile

2015-10-20 No Class splines editing

2015-07-23 Pitch depth of rack, UI improvements

2015-06-01 Improved messaging when creating assemblies in CAD

2015-05-12 AI Published

2015-05-06 More changes to bevel mounting

2015-04-22 Tooth Tip Radius for external spur/helical gears was added
			made the picScreen filled for better resizing with the mouse
			
****End of 2015 enhamcements

2015-04-16 GetSolidEdgeID updated for Surface... all 2015-16 products were updated

2015-04-07 Registration, no longer requires user to input email and company name

2015-04-06 AI helical spur, tooth extrusion when in metric units corrected

2014-12-14 Reverse annimation direction had not been programmed. If normal to cutter was selected, it also prevented it from running.

2014-11-15 Hunting / Not Hunting added

2014-10-30 Additional points were added to the display of the line of action

2014-10-22 Correction to MOW for metric helical internals

2014-10-18 Changes to the way the Tooth_Thickness_Minimum is specified when no class is used.

2014-10-15 some TextChanged were corrected to LostFocus, eg WGS Modular

2014-10-01 Correction to annotaions of EXT splines.

2014-10-08 Build 151+ LoadRegImageAlternative

2014-09-25 Added template retrieval help for AI

2014-09-05 Fix for Internal Splines, Major Diameter fit
			If specified SW cannot be started, it starts the last version.

2014-08-19 Correction  to EXT spline fillet radius when No_Class and not ANSI B92

2014-08-12 Added option for the user to specify the keyway dimensions.

2014-08-** Removed the internet time clock

2014-07-25 Master Gear Test added to data files
		   Test Radius Minimum property added 

2014 summer Bending and Sliding options were added to the Balancing Addendum Modifications

2014-07-24 WGS data file revamped

2014-07-21 Added Custom Coefficients to WGS
		   Constrain involute sketch now defaulted to true

2014-06-19 Version .132 new method for determining the end of the troichord.

2014-06-11 Change to opening GearTrax files

2014-05-27 Added contact ratio for Internal Gears that are not helical

2014-05-08 Chordal_Addendum and Chordal_Thickness properties for bevel gears added

2014-04-25 Changes to custom properties of bevel gears

2014-03-27 ASME_B29_10M_1997 & ASME_B29_15M_1997 standard added

2014-03-25 Changed the max number of spline teeth from 500 to 1001

2014-03-11  GetTrueInvoluteFormDiameter changed for external splines, there was a problem with low number of teeth  < 14

2014-02-21  Adjustment to MOW position on screen when a backlash is specified

2014-02-20  Correction to PGT tooth profiles if a backlash is specified

2014-02-14 txtSpurAddModg_LostFocus was updating the pinnion rather than the gear
